海外「喧嘩をする場所としては、ここが最悪な場所だろう」

·a fall from the roof
While I was working on the roof, I was walking backwards while holding a seat, and my foot was caught in a lighting window and I fell down.

·Crash with stepladder while pruning plant
When the plant was pruned using a stepladder, it lost its balance and fell into the road.
The height of the garden was more than two meters higher than the road, and the right foot was placed on a stepladder and the left foot on a concrete wall for pruning.

·Fall off foot while assembling steel frame
A worker carrying about 16 kilograms of steel fell on a beam about eight meters high.
There were no horizontal safety nets.
He was wearing a safety belt, but did not hook his master’s rope.

FALL OF VEHICLE FOR WORKING AT HIGH PLACE
·The workbench lifted by the forklift fell down
A worker on a workbench lifted by a forklift fell along with the workbench.
A blue sheet hanging work is carried out, and when the workbench is lowered, the blue sheet is caught on the workbench and the workbench is tilted and dropped.

·When the completion inspection was carried out using a ceiling crane, it fell from the stepladder
It occurred when a ceiling crane was used to move the mounting frame of the filter which is a part of the air conditioning equipment.
When I tried to climb up the stepladder and remove the ball, I lost my balance and fell from the stepladder.
Safety and health education for working vehicles was not provided, so they did not wear safety helmets.

fall from a stepladder
·a fall caused by a loss of balance
Case 1: While working on the stepladder top, I lost my balance and fell from my back.
Case 2: While I was riding over a stepladder and replacing a fluorescent lamp, I lost my balance and fell down the stairs.
Case 3: When I tried to get off the stepladder with my luggage in my hand, my feet staggered and fell from my back.

·fall due to external factors
While working on plumbing outside the building, the wind fanned him and fell over the stepladder, hitting a part of his body.

an accident caused by a lack of preparation for the work system
·FALLING ACCIDENT DURING NIGHT CONTAINER LIFTING WORK USING BALANCER
Three workers, one signal, and one monitor were deployed to start the work. When the tower crane was rolled up at high speed, the worker holding the balancer-side care rope was lifted together and crashed from a height of about 5m.
During night work, it was difficult for the signalers to see the workers, and the signal for the tower crane to wind up was not thoroughly known.

·Accident while replacing the wind-up shaft using a height work vehicle
As the foot of the work vehicle at the height of the height was tilted, the center of gravity increased during the rise, and the work vehicle at the height fell over.
One of the work cars at the height was working with a tilt.

necessary safety measures
Safety measures are essential to prevent accidents like the ones mentioned above.
When working at high places, make sure to follow the rules set by the Industrial Safety and Health Act.
Specifically, the following safety measures are required.